Windows下很多时候结束任务点了也不行吧。白屏一大片。
OSX下貌似还没有碰到过这种情况。有的时候有程序没响应，Command+Option+Esc找程序来“强制退出”的话，好像一点就秒退。

posted by wap, platform: iPad
win要杀进程

posted by wap, platform: 华为
要想体验OSX卡死容易得很，用苹果自己的AFP协议挂一块远程硬盘，在不推出的情况下断网，OSX马上死给你看。

在OSX下SMB，NFS协议就正常的多，不论手动umount还是超时都比AFP响应迅速得多，而且不会拖垮整个文件系统。

至于Windows，这种问题Win7之后就没有再出过了。

posted by wap, platform: Android
Osx 很不稳定的说。bug也很多。

引用:

原帖由 xphi 于 2015-1-31 14:06 发表
posted by wap, platform: 华为
要想体验OSX卡死容易得很，用苹果自己的AFP协议挂一块远程硬盘，在不推出的情况下断网，OSX马上死给你看。

在OSX下SMB，NFS协议就正常的多，不论手动umount还是超时都比AFP响应迅速 ...

公司里用WIN7，内存2G，三天两头出现这种情况。

引用:

原帖由 cc0128 于 2015-1-31 14:39 发表
posted by wap, platform: Android
Osx 很不稳定的说。bug也很多。

建议你重置一次PRAM  方法是关机状态下按开机  然后按下OPTION,COMMAND,P,R四个键   黑屏状态下一共听见三次 “咚”就放手  机器速度会比原来快很多  原理我也不懂  没有后遗症

posted by wap, platform: 华为
osx下杀毒软件怎么装？

2B的Xcode经常大姨妈，必须杀掉。

不能结束的情况多了去了。。。。不做开发遇到得少点。

posted by wap, platform: MAC OS X

引用:

原帖由 @ds999  于 2015-1-31 17:11 发表
公司里用WIN7，内存2G，三天两头出现这种情况。

win7 最多我的电脑的窗口死了, 其他改咋样咋样, 大不了结束任务...........

posted by wap, platform: iPhone

引用:

原帖由 @19岁时尚BOY。徐汇  于 2015-1-31 17:14 发表
建议你重置一次PRAM  方法是关机状态下按开机  然后按下OPTION,COMMAND,P,R四个键   黑屏状态下一共听见三次 “咚”就放手  机器速度会比原来快很多  原理我也不懂  没有后遗症

我好怕'你是在坑他吗？这方法真行？

posted by wap, platform: iPhone
有，我遇到过，自能强制按电源键。

引用:

原帖由 zxsoft 于 2015-2-2 06:55 发表
posted by wap, platform: iPhone
我好怕'你是在坑他吗？这方法真行？

I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.

I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.

First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.

Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.

Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?

Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.

Intel-based Macs: Resetting the System Management Controller (SMC)

Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.

To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.

More info about PRAM: OS X Mavericks: Reset your computer’s PRAM

Voila, reconnect your external displays and enjoy your system.

Message was edited by: Luis_Mercado

MacBook Air, OS X Yosemite (10.10)

有，遇到过，死活结束不了了，只能电源硬启。

posted by wap, platform: Chrome
倒是遇过两次五国，强行退出也退不了的没遇过。