原帖：http://landoftechnology.com/2013 ... -nexus-7-projectn7/



最神的是Homescreen完全就是汽车界面了

想法是不错~ 但关键的power按键好像没引出来~ 死机的时候怎么办 = =

power键就是右边的绿色圆圈按钮

posted by wap, platform: Android

出风口没了233

posted by wap, platform: iPhone 5

引用:

原帖由 @superfight  于 2013-1-27 14:32 发表
想法是不错~ 但关键的power按键好像没引出来~ 死机的时候怎么办 = =

电池拆掉，用汽车电源启动

导航到一半fc崩溃,然后死机 :D

空调出风口没了

然后热风散不出去，把平板和播放器都吹死烧鸡。

引用:

原帖由 hkt3010 于 2013-1-27 14:43 发表
posted by wap, platform: Android

出风口没了233

The next step was probably the most difficult, as i had to remove the central section of the air vents, as this is where i needed to move the head unit to. This bit would be on show so i had to be really careful trimming and with a little sanding i got it as good as i could hope.

中间的通气口被去掉了，不会有风吹到那里

posted by wap, platform: Nokia (Lumia 920)

引用:

原帖由 @Jonsoncao  于 2013-1-27 15:16 发表
The next step was probably the most difficult, as i had to remove the central section of the air vents, as this is where i needed to move the head unit to. This bit would be on show so i had to be rea ...

没注意，那还好，不然一会儿就烧了。

posted by wap, platform: iPhone

真的太神奇了！软件无敌了！

posted by wap, platform: Galaxy Nexus

我有想把cd机换成n7，就是不知道和车咋整合

posted by wap, platform: Nexus 7

我想法简单，就是在中控位有个固定n7的架子，但目前没有很好的办法

posted by wap, platform: Nexus 7

引用:

原帖由 @流浪的枪骑兵  于 2013-1-27 23:38 发表
posted by wap, platform: Nexus 7

我想法简单，就是在中控位有个固定n7的架子，但目前没有很好的办法

买个N7专用的硬套或背壳，自己加工处理呗~~

这样不是更简便  http://youtu.be/079mZbQjuQE