NOTE2 提高屏幕锐度的补丁来啦！！！！（第三方，我已测）

我机器已经刷了，对比我昨天提到的帖子问题好像有改善了：

昨天的帖子“各位有没有发现note2屏幕亮度最高时颜色分离？”：
http://club.tgfcer.com/thread-6558707-1-1.html

转机锋网的goodhanrry：
[ROM相关] 提升小牛2屏幕锐度，有木有？！Goodhanrry内核V1.0，可以有

具体改善效果看这里： http://bbs.gfan.com/android-5212479-1-1.html
当然，非常欢迎你使用此内核后，发帖跟大家分享下，同时给我一个反馈！谢谢

非常感谢xda上的Perseus分享的代码！

此内核基于三星官方源码进行编译，混合提升屏幕锐度的代码，其他没有进行修改，不超频。
特性：
1、提升屏幕显示锐度
2、支持init.d脚本

补丁下载：

CWM（卡刷）： http://kuai.xunlei.com/d/FRVIYQOGFVRW


ODIN（线刷）： http://kuai.xunlei.com/d/FIZREMVQFBXQ



[ROM相关] 第三方内核，新特性，要试试不？--锐度显示修正（转）

目前暂时找到的一个第三方内核，作者是xda上的Andreilux，衷心感谢
之前rom区有发过，现在此帖的是更新版为24.4（留意下面24.3这里，大家赶紧去试试，我刚好要出去了）
Features / changelist（特性，附翻译）:

Perseus alpha24 (09/10):
     Galaxy Note 2 source and kernel merge. Various platform fixes included from patching up from update5. （基于update5）
Fixed Mali GPU interface bugs relating to staycount, and lowered undervolt-soft limit down to 600mV. (修复与图形接口有关的gpu界面的bug，并降低undervolt-soft下限为600 MW)
Feature recap for new Note 2 users:
Overclocking up to 1.8GHz and undervolting support through SetCPU. Note 2 users have a better quality CPU than Galaxy S3 users, so mind the default high voltages on those frequencies.（超频到1.8ghz和undervolting--通过setcpu。note2用户比S3有一个更好质量的cpu，所以默认高电压的频率）
GPU overclocking and undervolting support（图形处理器超频和undervolting支持）.
A great amount of changes to improve battery life.大量的变化提高电池的寿命
Features which are in strikethrough in the changelog below do not work/are not ported on the Note 2, yet.
     24.3 => Sharpness fix for the display included. Courtesy of hardcore. （锐度显示修正）
     24.4 => Removed Touch Boost in exchange for the Flexrate mechanisms. See below inchangelog for more information. （删除Touch Boost）
Ported LCDFreq to the Note 2. See below in changelog for more information. The flickering is sadly still there on the Note 2. （移植lcdfreq到note2。更新的更多信息见下面。令人遗憾的是，在note2上仍然有闪烁-低刷新率时）
Fixed undervolting below 850mV, previous undervolting below that value would be disregarded and 850mV would be applied in reality, even if it showed up the entered value. （修正850mv下的undervolting，undervolting低于该值会被忽略，850mv将适用于现实，即使输入了比这个低的值）
     Improved boot time by about 22 seconds: Fixed a major bug in the sensor hub firmware update logic, in the stock kernel and currently published sources the sensorhub firmware is being flashed over the current one on every boot, regardless if the payload firmware is the same as the current one. The update is about 130kB but it is done over the incredibly slow i2c bus, so this slowed down boot considerably. The reason was mis-labeling of the kernel firwmare version in the driver and failure to check if firmware was actually newer. （改进的开机启动时间约22秒）

还有很多特性，这里不一一翻译，有空再说

固件下载：
本帖隐藏的内容需要 回复 才可以浏览(2周后自动解除隐藏)

卡刷：http://kuai.xunlei.com/d/FFJWORNIXOKP

odin线刷：http://kuai.xunlei.com/d/FDVGUMJFODWO

[ 本帖最后由 kevan 于 2012-10-16 18:18 编辑 ]