引用:

2.71 SE revision B'

To update, just run the new update from game150 folder, in 2.71 SE-A or 2.71 SE-B

Changes:

- Fixed the problem of crashing if the iso folder didn't exist
- Added experimental no umd mode. By default it is disabled.

New configurations:

- Use NO-UMD. It will enable the NO-UMD mode, whose compatibility is currently unknown, and
  probably less compatible than UMD mode. This is the main reason to release this quick update,
  to know more or less the compatibility of this no-umd mode.

- Use isofs driver also in UMD-inserted mode (in advanced). You probably don't have to touch this,
  it's mainly done for myself. If you do it, you may decrease the compatibility of UMD mode.


Note that if you want to change from NO-UMD mode to UMD mode, you have to do it in recovery.
Because even if you have an umd inserted, but you have the NO-UMD in settings, the CF will use the
method of umd emulation of NO-UMD, which differs a lot from the UMD one and may have a very different
compatibility.

Dark_AleX 太NB了！！

这次发布的只是升级程序，需要先安装2.71SE-B，安装方法在这里：
http://www.tgfcer.com/club/thread-5812419-2-1.html

然后把 B2版的 seb2_update 文件夹拷贝到 GAME150目录运行即可！升级只需要2秒左右
需要免引导的话，需要按住R进修复模式，打开NO-UMD模式

刷坏了找作者赔？搞笑么？这些软件哪个没有说明 use it with your own risk 的？
我昨天把PSP刷到2.71SE-B，又刷回1.5，来来回回刷了不下20多次，什么问题也没有

[ 本帖最后由 kurara 于 2006-10-28 01:32 编辑 ]

引用:

原帖由 兰色风暴 于 2006-10-28 12:03 发表


貌似有人刷了这个补丁后变转

那个程序是以前给2.71用的，不能给271SE用。特别是中文界面，271SE本来就不支持中文界面，偏要用那个程序强制更改flash1的界面语言设置，当然会挂
WMA和FLASH倒应该可以，因为271SE支持，更改flash1中的设置也无所谓

不过挂了应该也可以用271SE的修复模式，刷回1.5，这样就可以恢复flash1的设置

引用:

原帖由 兰色风暴 于 2006-10-28 12:41 发表
什么时候才能支持通过USB玩PC上ISO啊

暂时用Devhook，以后可能会直接支持USBHOST，关键是要解决加载自制prx的问题

不 用先装SE-A

如果要恢复1.5，只需要把2.71 SE-B 压缩包中的/flasher for recovery/RECOVERY/文件夹，拷贝到/PSP/GAME/目录，并且把1.5的升级文件改名为UPDATE.PBP拷贝到/PSP/GAME/RECOVERY/目录，然后在恢复模式中运行RECOVERY即可。