我记得在数码区就回贴过 在发一次
目前的19针的A类HDMI 接口最高只能支持1920×1080隔行显示信号，只有采用29针的B类HDMI接口才可以支持1920×1080逐行信号，但目前为止，我们还没有见到哪些HDTV电视或播放设备采用B类接口，所以现在诸多号称物理分辨率1920×1080P却采用19针A类接口的HDTV电视是不可信的。

catxing在上个帖子中说

引用:

---

www.hdmi.org/consumer/faq.asp#q6_3

Q. What version of HDMI does a consumer need to view 1080p content?

HDMI has always supported 1080p resolution, starting from version 1.0 in 2002. However, as with many functions that HDMI enables (such as DVD-Audio and SACD), it is up to the manufacturer to choose whether to implement 1080p in the device. Some TV and device manufacturers have chosen not to implement 1080p in their products because 1080p content has not been widely available, and because changing the internal electronics of the device to support 1080p would increase cost.

Viewing 1080p resolution requires at minimum that the HDTV have a display supporting the 1080p pixel resolution. Today, many HDTVs use display technologies (such as PDP, LCD, and microdisplay screens) designed for 720p pixel resolution.

In addition, many of today抯 1080p HDTVs support only 720p or 1080i on the HDMI input, then perform video processing to up-convert the 720p/1080i signal to 1080p. This is now changing, as 1080p content is becoming increasingly available, and HDTVs fully supporting 1080p in the display and HDMI electronics have begun to reach the market in early 2006.

All versions of HDMI are backward compatible. Consumers should not look for a particular version of HDMI, but rather for the functionality that they want the device to support (SACD, 1080p, etc.).


楼上的中国式专家可以去死了

---

错就错了
有错就去死？你没错过？
那你怎么还贱样的活着丢人？
不快点去死啊